System Components
UL EX-4510 2-1-12 Page 1-21
REV. 2
Description
The ʻʻMAINʼʼ nameplate is available for labeling compo-
nents and/or remote pull stations to distinguish them from
reserve system components. The nameplate is furnished
with four mounting holes for ease of installation.
Nameplate – MAIN
Shipping Assembly
Part No. Description
841942 Nameplate – MAIN
Component Material Mounting Hole Size Approvals
Nameplate Aluminum 13/64 in. (.52 cm) UL Listed (EX-4510); Listed for use
with FM Approved systems
MAIN
5 1/2 IN.
(13.9 cm)
4 7/8 IN.
(12.4 cm)
1 7/8 IN.
(4.7 cm)
2 1/2 IN.
(6.4 cm)
5/16 IN.
(.8 cm)
5/16 IN.
(.8 cm)
PART NO. 41942
4 – 13/64 IN. (.5 cm)
DIAMETER HOLES
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9331-03
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com
To Next Page
Loading...