Ansul INERGEN User Manual

Description
The Booster Actuator, Part No. 428949, is used when elec-
tric actuation is required on the 1 in. selector valve, 2 in.
selector valve, or the CV-98 cylinder valve. The actuator
mounts directly to the component and then a HF electric
actuator mounts to the top of the booster actuator.
The Booster Actuator requires resetting after actuation. A
Reset Tool, Part No. 429847, is available for this use.
System Components
UL EX-4510 12-1-01 Page 1-6
Booster Actuator
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001254 ©2001 Ansul Incorporated Litho in U.S.A.
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
006037
Ø 2.50
3.025
1 1/4 – 18 UNEF
1 1/8 – 18 UNEF
Component Material Approvals
Booster Stainless Steel UL Listed
Actuator and Brass (EX-4510)
ANSUL
®
®

Ansul INERGEN Specifications

General

Agent	INERGEN
Components	Nitrogen, Argon, Carbon Dioxide
Agent Composition	52% Nitrogen, 40% Argon, 8% Carbon Dioxide
Storage	High-pressure cylinders
Cylinder Material	Steel
Application	Total flooding fire suppression
Design Concentration	34.2% - 50% (depending on fuel type)
Storage Pressure	3000 psi (207 bar)
Environmental Impact	Zero ozone depletion potential, no global warming potential
Safety	Safe for use in occupied spaces when design concentration is maintained
Extinguishing Mechanism	Oxygen reduction to below combustion level
Approvals	UL, FM
Cylinder Sizes	Various sizes
Discharge Time	Typically less than 60 seconds
Typical Applications	Data centers, telecommunications, museums, archives