System Components
UL EX-4510 12-1-01 Page 1-18
Description
The Stainless Steel Actuation Hose is used to connect the
actuation line flared tees between each agent tank. The
hose has the same thread, 7/16-20, as the flared tees. The
actuation hose allows flexibility between the rigid actuation
piping and the tank valve.
Additional actuation fittings are available:
Part No. Description
_______ _________
831810 Male Elbow (7/16-20 x 1/4 in. NPT)
831811 Male Tee (7/16-20 x 7/16-20 x 1/4 in. NPT)
832338 Male Straight Connector (7/16-20 x 1/4 in. NPT)
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
Stainless Steel Actuation Hose
Shipping Assembly
Part No. Description
831809 16 in. (40.6 cm) Stainless
Steel Hose
832335 20 in. (50.8 cm) Stainless
Steel Hose
832336 24 in. (60.9 cm) Stainless
Steel Hose
Component Material Thread Size Approvals
Stainless Steel Hose Stainless Steel Female 7/16-20 UL Listed (EX-4510)
(Both ends)
24 IN.
(61 cm)
7/16-20
000433
7/16-20
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001266 ©2001 Ansul Incorporated Litho in U.S.A.
ANSUL
®
To Next Page
Loading...