System Components
UL EX-4510 12-1-01 Page 1-31
Description
The ‘‘RESERVE’’ nameplate is available for labeling com-
ponents and/or remote pull stations to distinguish them
from main system components. The nameplate is furnished
with four mounting holes for ease of installation.
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
Nameplate – RESERVE
Shipping Assembly
Part No. Description
841943 Nameplate – RESERVE
Component Material Mounting Hole Size Approvals
Nameplate Aluminum 13/64 in. (.52 cm) UL Listed (EX-4510)
RESERVE
5 1/2 IN.
(13.9 cm)
4 7/8 IN.
(12.4 cm)
1 7/8 IN.
(4.8 cm)
2 1/2 IN.
(6.4 cm)
5/16 IN.
(.8 cm)
5/16 IN.
(.8 cm)
PART NO. 41943
4 – 13/64 IN. (.52 cm)
DIAMETER HOLES
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001284 ©2001 Ansul Incorporated Litho in U.S.A.
ANSUL
®
To Next Page
Loading...