Antec NDT Series - Page 2

NDT-NFT-NAT ELECTROHYDRAULIC BRAKES
Instructions for assembly, adjustment and maintenance
T.D.S.: BC.TDS.00015I
Rev.01: January 2012.
www.antecsa.com
Page. 2-48
1. INTRODUCTION. Page 3.
1.1. WHO IS THE TARGET AUDIENCE? Page 3.
1.2. SAFETY INSTRUCTIONS. Page 3.
1.3. RISK ASSESSMENT. Page 5.
1.3.1. IDENTIFICATION OF THE BRAKE'S POTENTIAL RISKS. Page 5.
1.3.2. ANALYSIS AND ASSESSMENT OF THE RISKS IDENTIFIED. Page 7.
1.3.3. MEASURES ADOPTED TO MINIMISE THE RISKS ANALYSED. Page 7.
1.4. GENERAL ASPECTS. Page 11.
2. BRAKE OPERATION. Page 14.
3. BRAKE ASSEMBLY. Page 16.
4. BRAKE ADJUSTMENT AND SETTING. Page 22.
5. BRAKE MAINTENANCE. Page 29.
6. CHANGING THE BRAKE SHOES. Page 30.
7. BRAKE OPTIONS. Page 33.
7.1. AUTOMATIC RECOVERY (RA). Page 33.
7.2. BRAKE OPEN SIGNALLING CONTACT (CSA). Page 38.
7.3. BRAKE SHOE LINING WEAR DETECTOR (DD). Page 41.
7.4. BRAKE MANUAL UNLOCK (DM). Page 42.
7.5. DESCENT VALVE IN TURBEL BRAKE LIFTER (VD). Page 43.
7.6. REDUCED TORQUE BRAKES (PR). Page 45.
7.7. SPECIAL PAINT (PE). Page 47.
7.8. PNEUMATIC OR HYDRAULIC OPENING OF THE BRAKE. Page 47.
7.9. BRAKE WITH TURBEL ATEX CERTIFICATION. Page 47.
8. SPARE PARTS. Page 48.
9. ONGOING IMPROVEMENT PLAN. Page 48.