Need help?Do you have a question about the Antelliq Allflex SenseHub and is the answer not in the manual?
General| Category | Farm Equipment |
|---|---|
| Ingress Protection | IP67 |
| Type | Livestock Monitoring |
| Connectivity | Bluetooth |
| Battery Life | Up to 3 years |
| Data Transmitted | Activity, Rumination, Health Alerts |
| Operating Temperature | -20°C to 55°C |
| Communication | Wireless |
Follow steps to correctly install the SenseHub Controller, including reset procedures.
Details PoE injector location, Ethernet cable running, and bracket attachment.
Connects PoE injector to power, Ethernet cables, and verifies controller LEDs.
Describes installing a second antenna, including PoE injector and Ethernet cable setup.
Details bracket attachment to wall or pole for the additional SenseHub Antenna.
Hangs the antenna, connects PoE injector, and runs Ethernet from PSE to Antenna PD connector.
Connects Antenna to Controller and checks LED status for proper operation.
Details installing the SenseHub Server, including component overview and initial setup.
Covers attaching the antenna bracket and connecting the server/antenna to the network.
Hangs the antenna and connects the PoE injector to the antenna.
Connects PoE injector/Ethernet for the antenna and verifies its LED status.
Uses wireless network extension for installations over 100 meters from the router.
Connects remote Nano station to adapter and attaches controller bracket.
Hangs the controller and connects PoE injector to the controller.
Details connecting the Sorting Gate Controller to the network and its assembly.
Covers PoE injector location, Ethernet routing, and verifying LEDs for sorting gate.
Provides solutions for common installation issues related to controller LEDs and network access.
Steps to attach cSense Flex tags, including preparing and recording tag information.
Details on positioning the cSense Flex tag correctly on the cow's neck.
Instructions for unbuckling and removing cSense Flex tags from cows.
Steps to configure the SenseHub system, including application installation and registration.
Information on trial mode availability and completing the account details section.
Recording the Farm ID and determining integration with a Herd Management System.
Choosing validation mode and configuring herd management system integration.
Defining file paths and naming controllers/antennas for farm topology.
Steps for entering user credentials, verifying account details, and password requirements.
Answering security questions, agreeing to terms, and signing in after registration.
Lists minimum requirements for tag versions, PC, browser, network, and firewall.
Preparation and required data for entering heifers and cows into the SenseHub system.
Describes how to configure SenseHub for farm protocols and practices.
Provides information about the configuration and working environment of the SenseHub System.
Settings for SenseHub Operation Mode, Tag Communication, and Internal Algorithm Versions.
To Next Page