To Next PageTo Next Page
Need help?Do you have a question about the Anthony Gallo Acoustics MPS-150 and is the answer not in the manual?
General| Amplifier Power | 150 watts RMS |
|---|---|
| Weight | 20 lbs |
| Enclosure Type | Sealed |
| Inputs | RCA, Speaker Level |
| Type | Subwoofer |
| Finish | Black |
| Frequency Response | 28 Hz - 150 Hz |
Adjusts subwoofer output level relative to main speakers for balanced audio.
Sets the highest frequency the subwoofer reproduces to match system speakers.
Connects sub to preamplifier/processor via RCA for line-level signals.
Controls power: ON, OFF, or automatic activation with audio signal.
Selects 0° or 180° phase for optimal integration with speakers.
Connects via speaker cables when line-level outputs are unavailable.
Connects AC power and protects the unit from abnormal power conditions.
1/4" phone jack for connecting electronics and woofer modules.
Instructions for connecting to receivers and preamplifiers with RCA jacks.
Instructions for connecting using speaker cables for systems without line-level outputs.
Connecting to full-range speakers, bypassing crossover via speaker cables.
Connecting the electronics and subwoofer modules with the supplied cable.
Recommendations for positioning the subwoofer for optimal bass performance.
Details the downward-firing woofer design and clearance requirements.
Advice on experimenting with placement to find the best sound.
