Finally, click the ‘Media Renderers’ tab. This window shows the DLNA renderers that have been located on the network, in this example
‘antipodes_USB’, a player on the Antipodes server, and BubbleUnP SM-G3600 (the local player on a Samsung Galaxy smartphone).
Check the ‘Create an OpenHome renderer’ box to enable OpenHome capability for the renderer.
How to Run BubbleUPnP Server.
After it has been successfully installed BubbleUPnP Server will be started automatically and then runs continuously. It is automatically started
when the Antipodes server is powered on. It can be restarted by pressing the ‘Restart Server’ button on the ‘Status’ screen.
BubbleUPnP Server Support
Usage and support information for BubbleUPnP Server is available at www.bubblesoftapps.com/bubbleupnpserver/.
To Next Page
Loading...
