Note that the install may take quite a long time (>15 minutes +). Let the installation complete and wait until you see the ‘Return to Package
Manager’ message.
How to Install HQPlayer NAA
If you are going to use the NAA playback option, on the Antipodes to which your DAC is connected, i.e. EX or DX3, go to Apps/Software
Manager/Available Apps and click the HQPlayer Server icon
Then click ‘Install’:
How to set up HQPlayer Server on an Antipodes to play via ALSA
If your DAC is connected to the Antipodes where HQPlayer Server is running (see 1.2 above) you can use ALSA (Advanced Linux Sound
Architecture) to play directly to the DAC.
With this mode you do not need to install the NAA and you do not use the Audio App Switcher.
Go to Settings / HQPlayer Server and click ‘HQPlayer Cong’:
On the next screen enter ‘admin/admin’ and click ‘OK:
The HQPlayer conguration screen will be displayed:
To Next Page
Loading...
