Antsig AP536 - Package Contents; Specifications and Reception Notes; Key Specifications; Reception Notes

PACKAGE CONTENTS
Please check the content before installation
1. AP536mainunit
2. Multi-directionalbase
3. Wall mounting package (plastic insert X3, screw X3)
4. 10metreCoaxialcable(FmaletoFmale)X1
5. 1.5metreCoaxialcable(FmaletoFmale)X1
5. ACadaptorX1
6. Instruction sheet
Notes:
Forthebestreception,Pleasecheckthefollowingconditions
1. Farawaythesourceofinterference:Farawaythosebigpowerconsumptiondevices,suchasair
conditioner, elevator, hair dryer and microwave oven. Etc
2. InstalledAshighaspossible:Incaseofterrestrialreception,iftherearesomeinterceptions
between Antenna and transmission tower, it will cause the signal loss temporary.
So if the antenna is installed as high as possible, this interference will be reduced.
ANTSIG an Arlec Consumer Products Brand
For all Sales Phone (03) 9727 8860 Fax 1300 360 650
CPIN1086
Frequency range : VHF 47~230MHz
UHF 470~870MHz
Antenna gain VHF : 20dB
Output resistance : 75Ω
Polarization method : Horizontal
Power supply : 9V DC, 100mA
Cable length : 1.5 and 10 metre
AP536 Instructions.indd 2 17/11/09 2:38:22 PM