4
P/N 1011458 Rev D 01/22
Equipment Description
The steam generator is a small footprint 30 psig boiler capable of delivering roughly 25 pounds of steam per hour. The steamer has
transfer dramatically.
-
design that avoids many of the common issues facing commercial boilers and steamers today, and provides lower operating and
-
tive (PID) controller. Both temperature and pressure are used in the control operation of the steam generator.
steamers. Although the steam generator is pressurized, the steam cavities are not. This provides optimum cooking and steaming
of many foods; the high-pressure steam provides velocity and high temperature, while the atmospheric cavity allows the steam to
cavities and drawers. Placed inside the drawers are standard half size high temperature steamer pans and trivets. The drawers,
steamer pans and trivets are easily removed for daily cleaning. Cavities can just be wiped down at the end of the day, minimizing
labor clean-up costs.
The outer panels of the steamer is a combination of stainless-steel and powder coated aluminum. The steamer is capable of being
double stacked by removing four bolts located on the top cover. The steamer also has a GUI (Graphical User Interface) panel to al-
low for easy programming of product cook times and rest times. See Operational Instruction Section for further details.
The steamer has service connections on the rear base of the steamer. 3/4” I.D. x 1” hose rated to 300-degree
To Next Page
Loading...