Need help?Do you have a question about the Anywhere TK106 and is the answer not in the manual?
Steps for initial charging, SIM card insertion, and device power-on indicators.
Visual guide for correctly inserting the SIM card into the device.
Set device password and authorize phone numbers for commands.
Configure device behavior based on movement for power saving.
Data storage and upload for blind spots or network loss.
Configure Access Point Name (APN) for internet connectivity.
Configure IP address, port, and data transmission intervals.
Details on accessing the GPS monitoring platform and user login.
Authorize phone numbers via SMS and change the default password.
Get current location by calling the unit for a positioning message.
Configure interval-based real-time SMS location reporting.
Enter and exit the monitor mode for listening to surroundings.
Set traffic mode sensibility for automatic data sending or sleep.
Enable or disable shake detection alarms and set sensitivity.
Configure speed limits to trigger SMS alarms.
Set distance thresholds to trigger movement alarm SMS.
Define geographical boundaries to trigger SMS alerts on breach.
Steps to calculate total mileage using SMS commands.
Activate SOS alert to send help messages to authorized numbers.
View location on map via link or switch to date format.
Retrieve device info like IMEI, speed, battery, and position state.
Adjust the device's time zone settings via SMS command.
Change communication protocol between UDP and TCP.
View device version and perform a system reset.
Details on GSM, CPU, GPS chip, battery, and operating conditions.
To Next Page
General