EasyManua.ls Logo

Anywire B2G78-PN1 - Page 8

Default Icon
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Overview
1-1
1. Overview
B2G78-PN1 is the gateway unit for the PROFINET and AnyWireASLINK systems. This unit allows the
user to connect the AnyWireASLINK system to PROFINET.
The AnyWireASLINK system is a Sho-Haisen (wiring saving) system equipped with small and fewer-
point and multiple-distribution units suitable for wire saving on the sensor level.
This system covers bundling of a minimum 1 point to 16 points in a compact unit, therefore, it can
bundle even in a narrow device in which BOX is not placed.
In addition, Digital Link Sensor in which AnyWireASLINK sensing function and wiring saving function
are incorporated is proposed.
This is a sensor directly connectable to the transmission line, and offers ultimate wiring saving without
using a remote terminal.
And, not only ON/OFF information, but also information such as sensing level and disconnection are
transmitted to the controller side.
It is possible to monitor the operating state, prevent momentary stop and significantly reduce cause
investigation time at the time of failure.
* PROFINET is a trademark of PROFINET Nutzerorganisation e.V.
In this manual, trademark symbols such as
TM
and ® may be omitted.