1. Auto Config
2. Eco Mode/ down
3. Up
4. Menu / Enter
5. Power Button & Indicator
OSD Settings
•
Press the MENU-button to activate the OSD window.
•
Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-buttonto activate it.If the function selected has a sub-menu,
press or again to navigate through the sub-menu functions.Once the desired function is highlighted, press MENU-button to activate it.
•
Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-3.
•
OSD Lock Function: To lock the OSD, press and hold the MENUbutton while the monitor is off and then press power button to turn the monitor on. To un-lock the
OSD - press and hold the MENUbutton while the monitor is off and then press power button to turn the monitor on.
•
Eco Mode hot key : Press the Eco key continuously to select the Eco mode of brightness when there is no OSD ( Eco mode hot key may not be available in all
models).
•
Press Exit key continually for 7 sec. to turn on or off DDC-CI.
To Next Page
Loading...
