6
(5) For any recorded macro, you may delete or adjust its event sequences, or add new events
by initiating another recording session.
2. Delete a Macro
Select the macro to be deleted and click on the Trash Bin
button down below. A message window will pop up to confirm
your decision. Click the Ok button to delete the macro.
3. Edit Delay
To adjust the delay time, double-click the field to be revised and enter the new value. Some
games may not be able to detect short delays.
4. Delete Record Actions
To delete a single or multiple actions or delay time of the macro, click the trash bin button.
5. Insert Macro Item
Click the button to start inserting another macro to an existing macro. Choose to record
this new macro before or after the existing one; then click the Start button to start the
recording. When done, click the Stop button to complete the session, or the Save button to
keep the recording. You may also insert delay time before/after the selected event. After
entering the desired time value, click the Save button.
◼ Multimedia
Open Player: Start media player.
Pre Track: Toggle to the previous media track.
Next Track: Toggle to the next media track.
Play/Pause: Toggle between playing and pausing media.
Stop: Stop playing the media.
Mute: Mute (turns off) the computer sound.
Volume +: Increase the computer sound volume.
Volume -: Decrease the computer sound volume.
◼ DPI Switch
DPI Up: Increase the DPI.
DPI Down: Decrease the DPI.
DPI Cycle: Cycle between the 5 options of the G-Tools.
DPI Shift: Predefined DPI at 400.
◼ Window Management
To Next Page
Loading...
Need help?
General
