13
Step 4: Enter to OSD menu. Go to OSD Setup page and select “Auto”, “USB C”, or “USB UP” of USB Selection tab.
Exit Enter Select
OSD Setup
Timeout 10
EnglishLanguage
Break Reminder Off
V.Position 0
H.Position 100
USB
USB Selection
Auto
Off
Transparence 25
USB Selection Function Description
Auto Auto selects USB C or USB Up depending on the input source.
USB C Provides USB Hub function through Type-C cable.
USB Up Provides USB Hub function through USB B cable.
To Next Page
Loading...
Need help?
General