10
TV/Channels
Menu Descriptions
Channels
Channel scan
Channel Scan will re-tune the television automatically. It is recommended to run the Channel Scan
periodically to ensure that all new services are added.
Update scan
Search the new channels automatically that are not in the channel list.
Single RF Scan (Digital Only)
Enter the Single RF Scan in the Channels submenu to scan digital channels.
Analog Manual Scan
The television can be tuned-in manually using Analog Manual Scan. Use the number keys to enter
the Start Frequency to scan up or scan down.
Channel skip
To prevent certain programs from being viewed by pressing CH + / - buttons on the remote control,
the program position can be skipped. Tip: The skipped program may not be found by pressing CH + /
- buttons but can be access by pressing number buttons directly.
Channel sort
Change the order of the Channel List.
Channel Edit
Enter the Channel Edit in the channels submenu to edit the channel number and channel name by
using the number buttons 0~9. Note: The following RC number-mapping table will not be shown on
the TV screen.
Decoder (Analog only)
Channel Decode support the Canal+ (paid television channel); however, the channel also broadcast
some un-encrypted programs. These programs without encryption can be viewed free of charge.
Analog CH Fine Tune
Select Analog CH Fine Tune in the Channels submenu to adjust the frequency.
To Next Page
Loading...
Need help?
General
