2.2 To Use the Menus
1 Press the MENU button.
2 Press the ▽or △ button to select a menu item.
3 Press the < or > buttons to enter a sub-menu.
4 Press the ENTER button to enable/disable function.
5 Press MENU or EXIT to exit the menu.
Press the Menu button to enter the main OSD (On Screen Display). Adjust the items including Setup menu, Video
menu, Audio menu and Feature menu. However, some function items in the menus may only be enabled in the
particular source modes.
The Setup menu in TV mode shows as below. In others source modes, the Setup menu only shows Menu
Language and Aspect Ratio items.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. DTV Signal: Show the intensity of the received DTV signal.
3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. In
channel scan process, the OSD can display the number of channels which had been found.
4. Add on Ch search: Add channels which are new found.
5. Manual Channel Set: Show the channel setup table. User can choose to display the ATSC or NTSC TV channels
and then edit the channel (Viewable or Not Viewable by pressing Enter button). User won’t be able to view the
channel that has been set to Not Viewable when toggling through channels. However, the channels are still
accessible when user enters the channel number.
6. Channel Labels: Show the NTSC / ATSC TV channel label menu for user modifying channel labels specifically.
7. Menu Language: Select the menu display language. (English / Espanol / Francais)
8. Aspect Ratio: Select the display aspect ratio. (Normal/Zoom/Wide/Cinema)
9. Favorite Channel Mode: When favorite channel mode is on, user can edit favorite channel table in favorite
channel set option.
To Next Page
Loading...
Need help?
General
