AOC LE32S1865 - Page 25

9. Poor embedded power supply of TV
10. Common fault of LCD screen
10.1 Bright line or bright belt (BL): constant longitudinal or transverse illuminating line or
belt due to non-conformed connection between IC and glass
10.2 Dark line (DL): constant longitudinal or transverse illuminating line due to
non-conformed connection between IC and glass.
10.3 White panel (WP): only light tube illuminates owing to non-conformed drive plate of
the LCD, without any display signal in the display area, and the whole screen is white.
10.4 Screen breaking: (overflow of LCD): with damage or invisible damage of the liquid
crystal glass, irregular black defect occurs from liquid crystal body to glass and polarizer,
which can not be seen at any image. The overflow portion can not form image and does not
display.
10.5 Pressing Scrape (PS): after local display area at the front of LCD is heavily pressed,
Power on, check embedded power supply 5VSB in TV for 5V voltage output
High electrical level existed at
STB (higher than 2.5V)
Replace power supply
YES
YES
NO
NO
Check EC2 for 380-400V
voltage; if there is not,
replace power supply
Check +5V ， +12V
for normal input
YES
Check power supply line for looseness, check indictor for
working and power supply socket for looseness
NO
NO
Replace power
supply
Fasten lines
and socket
24