Factory Mode
Press the following key sequence on a standard RC transmitter: “8202” directly followed by MENU
Purpose
To perform extended alignments.
Primary menu Secondary menu Value,remark
ADC ADJUST
MDOE VGA/YPBPR(SD)/YPBPR(HD),Selection
R-GAIN
Front-end gain adjustmentG-GAIN
B-GAIN
R-OFFSET
Clamp level adjustmentG-OFFSET
B-OFFSET
AUTO ADC ADC automatically adjust
PICTURE MODE
MODE
VGA/HDMI1/HDMI2/HDMI3/DTV/ATV/AV/
YPBPR
PICTURE MODE Dynamic/Standard/Sotf/User
BRIGHTNESS BRIGHTNESS
CONTRAST CONTRAST
COLOR COLOR
SHARPNESS SHARPNESS
TINT TINT
Copy all No function
W/B ADJUST
Source
VGA/HDMI1/HDMI2/HDMI3/DTV/ATV/AV/
YPBPR
TEMPERATURE Cool, Standard, Warm
R-GAIN
White level adjustmentG-GAIN
B-GAIN
R-OFFSET
Black level adjustmentG-OFFSET
B-OFFSET
Copy all No function
SSC
MIU Enable DDR spectrum enable
MIU0 Span Exhibition frequently wide
MIU Step Spread spectrum step
LVDS enable LVDS spectrum enable
LVDS Span Exhibition frequently wide
LVDS Step Spread spectrum step
LVDS swing LVDS swing
Spectial set
2HOUR OFF 2hours power off enable
WDT on/off
WHITE PATTER OFF/White/Red/Green/Blue/Black/192Grey
22
To Next Page
Loading...
