3
．
Use tips
Move the the lid(1), adjust the lid either up or down until the
Aiming Point(14), aiming line (2) and the object on a straight
line.While doing so keep the compass exactly horizontal by
using the integrated spirit level(8).
By skillfully handing the compass the Arming line(2)
corresponds to the Aiming Point(14), thus ensuring that
eyes,compass dial and object are at same level and resulting in utmost accuracy.This method allow to read the
fraction of an angular degree.
Adjust the position of the prism or lens which on the 360° Rotating Bezel Ring (6 ) until you see distinctly the
numbers of the compass card(12 ).In models with adjustable eyepiece,the Sighting Lens(15) must be rotated until
numbers in degree are clearly visible.
Optimeal results are obtained when you keep the compass at a distance of 1-2cm from your eyes.
4
．
Taking a bearing
With your compass in reading position,aim at an object,sighting it through the Aiming Point (14 ) and the aiming
line(2).Now read the value of your marching direction on the compass card (12 ) which also correspond to the
azimuth of the object.
To Next Page
Loading...