User settings
The user can choose to change the desk's default settings. In total there are
6 settings that can be changed. These are numbered in the following order S
1 to S-6.
You can change the settings by pressing «M» for 5 seconds. Then select
which setting you want to change, using «↑» and «↓». Then press «M» again
to select the selected user setting. Select the desired setting and confirm it by
pressing «M».
S1) CM or INCH
1. Press «M» for 5 seconds;
2. Then "S-01" flashes on the display;
3.
Press «M» again;
4. Then use «↑» or «↓» to select 1 or 0; (0 = CM & 1 = INCH)
5. To save, press «M» again.
S2) Adjust anti-collision sensor sensitivity
0: means off, 1: is the least sensitive and 8: is the most sensitive.
S5) Determine the minimum height display (standard 65 cm)
Select the minimum height that will be showed on the display.
S6) Determine automatic or manual operation of memory buttons
0: means manual placement (press and hold the button);
1: means automatic
placement to the selected height.
Standing reminder
To activate timer, press «1» and «3» together, the display shows «x.xh».
Then press «↑» or «↓» to adjust the timing.
- When the handset is in sleep mode a flashing dot indicates that the timer is running.
- When the timer has reached the programmed time a buzzer will sound five times
and the handset will wake up from sleep mode.
- Now select the desired height by using «↑» or «↓» button.
Lock and unlock the desk
- Press «M» and «↑» together for 5 seconds to lock the handset.
- Press «M» and «↓» together for 5 seconds to unlock the handset.
S3 & S4) Safety setting, do not adjust before consultation with a professional
To Next Page
Loading...
Need help?
General