0
After you subscribed a DSL account and get your Internet account and password, you have
to install a DSL modem between your computer and the telephone wall outlet. Normally
the phone company will make the installation for a subscriber. In some countries, the phone
companies only lease the DSL modem to a subscriber and provide the subscribers with user’
s manual for the modem and installation software. Please read your modem user’s manual on
how to operate and maintain the DSL modem.
After the DSL modem has been connected to your computer, you have to install the software
which is required to “drive” your modem. The installation software is pretty easy to install
and executes automatically. Before the installation, you or the person who does the software
installation for you have to nd out the connection information. The DSL access provider
usually has the connection information. During the installation process, the system will request
you enter your Internet account ID and password. Make sure you record your Internet account
ID and password carefully for future reference. After the software installation process has been
completed, you have to restart the system in order to surf on the Web. The rst time you restart
your computer after the installation, you will probably see a DSL access icon on the screen of
your computer. After clicking that icon, you will go through the Internet on-ramp to the Internet
highway. If you cannot access the Internet, please consult your DSL access service provider.
To Next Page
Loading...
Need help?
General