APx515 B Series Audio Analyzer: Analog I/O Specifications 53
515
SMPTE & MOD
Lower Frequency (LF) 40 Hz to 1.00 kHz LF tone must be 1/6 • HF tone.
SMPTE Upper Frequency (HF) 2 kHz to (0.499 • SR) or 60 kHz, which-
ever is lower
MOD Upper Frequency (HF) 240 Hz to (0.499 • SR) or 60 kHz,
whichever is lower
Mix Ratio (LF:HF) 10:1, 4:1 or 1:1
Residual IMD
1,6
Typically <–140 dBFS
DFD & CCIF
Tone Pair Mean Range 2.5 kHz to (0.499 • SR – F
mean
/ 2) or
20 kHz, whichever is lower
F
mean
= (F1 + F2)/2.
Tone Pair Difference Range 80 Hz to 2.0 kHz F
mean
= (F1+F2)/2, F
diff
= |F2–F1|.
F
mean
must be 6 • F
diff
Residual IMD
1,6
Typically <–150 dBFS
Multitone, Wave File Playback
Sample Rate (SR) 8 kS/s to 216 kS/s
Maximum File Size 32 MSample.
Flatness (1 kHz ref) Typically <0.001 dB to 0.499 • SR
Spurious Content Typically <–140 dB
DIGITAL INPUT RELATED:
Formats
Electrical, unbalanced SPDIF-EIAJ per IEC60958, 10 Vpp. Input R is nominally 75
Electrical, balanced AES-EBU per AES3-1992, 10 Vpp. Input R is nominally 110
Optical Toslink®
Sample Rate Range (SR)
Electrical 27 kS/s to 216 kS/s Typically locks down to 16 kS/s
Optical 27 kS/s to 108 kS/s
Characteristic Specifications Supplemental Information
To Next Page
Loading...