Need help?Do you have a question about the APART SDQ5Pir and is the answer not in the manual?
General| Type | Portable speakers |
|---|---|
| Dimensions (WxDxH) | 182 x 170 x 252 mm |
| Woofer diameter | 133.4 mm |
| Tweeter diameter | 25.4 mm |
| Audio output channels | 2.0 channels |
| Frequency range | 45 - 20000 Hz |
| RMS rated power | 60 W |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Package weight | 6200 g |
| Product color | White |
| Remotely operated | Yes |
Weight and Dimensions| Weight | 2850 g |
|---|
General safety guidelines including checking packaging and handling precautions for safe operation.
Warning about potential hearing loss from exposure to high sound pressure levels and recommending hearing protection.
Description of the SDQ5PIR as a versatile, compact, plug-and-play sound system with active and passive speakers.
Details on remote control options (IR, RS232, wall panel) and the auto power off function.
Information on adjustable inputs, mixing capabilities, and automatic power-on trigger.
Description of volume, treble, bass controls, and the power/standby button on the rear panel.
Explanation of the status LED and the RS232 communication port on the rear panel.
Details on connecting audio inputs (A, B) and the speaker output.
Information on selecting stereo/mono mode and connecting the mains power.
Explanation of the RJ45 connector for optional wall control panels.
Details on RS232 port settings, physical connection, and data transmission pins.
Instructions for waking the unit from standby mode via RS232 commands.
Description of setting volume (SDQLVL, MAXLVL) and channel balance (BALANCE).
Details on adjusting bass (EQBASS) and treble (EQTREB) levels.
How to select input sources (SELECT) and adjust input gain (IPGAIN).
Explanation of the auto power trigger level (AUPTRG) setting.
Settings for back panel, wall panel, IR remote control, and auto power off (AUTOPW).
Procedure to restore factory defaults using RS232 commands.
Procedure to restore factory defaults using physical buttons on the unit.
Table listing attributes like Volume, Balance, and their respective commands and values.
Table listing control parameters like Standby, Echo, and version information.
Instructions for battery type, replacement, and proper handling of the remote.
Indication of the IR eye receiver location on the speaker unit.
Warnings regarding battery disposal, handling, and extended storage.
List of remote control functions and their corresponding IR command codes.
Detailed specifications for speaker type, driver sizes, impedance, sensitivity, and audio controls.
Specifications for output power, SPL, frequency range, THD, and S/N ratio.
Details on materials, dimensions, weight, and shipping information.
Information on battery type, applicable voltage, operating temperature, and humidity.
To Next Page
