The PUBDRIVE-2000 is a 3 channel amplifi er, created to drive left and right top cabinets and a
subwoofer unit. The amplifi er is designed for professional use. Its sturdy metal housing can eas-
ily be mounted in a 19” rack or be used as a table top amplifi er. The sober front panel is crystal
clear and easy-to-operate.
All installers features are available at the back of the amplifi er. Each input has a parallel output
available to link the signal to other amplifi ers or processors. The selectable X-over point for the
left and right channel allow the system designer to create the perfect sound synergy, no matter
what location you are using the PUBDRIVE-2000 in.
The pre-amp out and amp-in make it possible to link the processed signal to additional power
amplifi ers, insert extra sound processors or just use the PUBDRIVE-2000 as a power amplifi er
(the X-over section is by-passed,but the
volume controls and limiters are still after the AMP-IN input).
The design is based on the best components without any compromise. Huge power is always
available, no matter what speakers you are driving. The left and right channel can be charged
with 2.7 Ohm loads while the SUB channel accepts 2 ohm loads.
The PUBDRIVE-2000 is equipped with 2 very silent variable speed fans (Left + right chan-
nel and SUB channel). The fans will turn at 50% as soon as a temperature of 50° C has been
reached. When the temperature exceeds 70°C, fans will turn at full speed. The oversized power
supply with thermal protection circuit and soft start, together with the integrated AP-limiter®
make the PUBDRIVE-2000 a fail-proof amplifi er, 24 hours a day, 7 days a week!
To Next Page
Loading...