CRS 40 V2
Installation, operation and service manual M2019/02a
Warning! DIP switch configuration ON-ON-ON-ON is intended only for manufacturer test purpose. It
must not be used in everyday operation. Such units are not functional.
The situation shown in Illustration 8: Overlapping networks of two billing companies is only illustrative. In
practice, the range of radio equipment, especially in the building, has no circular shape (see chapter 4.
Spreading of radio waves).
Warning!
If two reading networks with the same first four digits of RF MAC address and the same
configuration of DIP switches would be started up, newly installed network will not work. It will be
necessary to restart units B of both reading networks after changing the DIP switches configuration
17 / 57
To Next Page
Loading...
Need help?
General