9Metered Rack PDU User’s Guide
OK, Warning, Overload LED Indicates the status of the Rack PDU load. See “Load indicator
LED” on page 12.
Temp/Humidity port Port for connecting an APC Temperature Sensor (AP9335T) or
an APC Temperature/Humidity Sensor (AP9335TH).
In and Out ports (For future use)
USB port For use with a flash drive for firmware upgrades.
RJ-12 Serial Port Port for connecting the Rack PDU to a terminal emulator
program for local access to the command line interface. Use the
supplied serial cable (APC part number 940-0144A).
10/100 Base-T Connector Connects the Rack PDU to the network.
Network Status LED See “Network Status LED” on page 11.
10/100 LED See “10/100 LED” on page 11.
Reset button Resets the Rack PDU without affecting the outlet status.
Item Function
To Next Page
Loading...