6
Required Tool List for System Installation
• Channel Locks
• Screwdriver
• Plumber’s Tape
• Utility Knife
• Two Adjustable Wrenches
• Please note the modification to home plumbing may require the use of additional tools.
Required Components not Included with the System
• 80 lbs Extra Course Grade Salt Pellets are needed to fill the brine tank. The softener system will use any
kind of salt formulated for water softener use, but it is advised to use the pellet-shaped salt as it tends to
dissolve more evenly. (Potassium can be used for a salt-free alternative)
SITE REQUIREMENTS:
• Water pressure: 25-90 psi.
• Water temperature: 40° F - 100° F.
• The tanks should be on a firm, level surface.
• Electrical: Use a 100-240v, 60Hz uninterrupted outlet.
• Use 1” (or 3/4” depending on system) copper, brass, or PEX pipe and fittings. Some plumbing codes may
also allow PVC plastic pipe.
• Current draw is 0.25 amperes.
To Next Page
Loading...
Need help?
General
