Apec Water SOFTENER-HE-30-FG User Manual

12
4. Detach both bypass valve connectors from bypass valve and verify the flow sensor is properly in place
then install both bypass valve connector o-ring.
5. Screw the bypass valve connectors to the digital control valve.
6. Push the bypass valve into the bypass connectors securely to install the bypass locking clips.
2. Obtain the digital control valve and install the digital control valve o-ring on the bottom of digital control
valve.
3. Screw the digital control valve tightly onto the top of the tank.
Flow sensor preinstalled

Apec Water SOFTENER-HE-30-FG Specifications

General

Brand	Apec Water
Model	SOFTENER-HE-30-FG
Category	Water Dispenser
Language	English