Apec Water SOFTENER-HE-30-FG User Manual

16
CLOCK PROGRAMMING: TIMER DIAGRAM AND SETTING
1. Setup Time of day
• Press to go to main menu Set Softener. Select Set time of day using and arrows.
• Once Set time of day is highlighted, press to enter time setting menu. The hour value “12” will flash, use
and arrows to adjust the hour menu. Please note this is a 24 hour menu so 0 is am, 12 is pm).
• Once the hour is set, press the minute value “30” will flash. Use and arrows to adjust the minute
value. Once the minutes is set up, press and you will hear a “DI” sound. This completes the time of day setup.
• Menu/Confirm button: To setup time of day, regeneration time, and tap water hardness levels.
• Manual Regeneration/Return to home button : Press the button once and it will start regeneration
cycles instantly. Press the button continuously can skip and stop regeneration cycle.
Back Washing
Remaining: 2min
11 : 21 : 34
Water System
Motor Running
Remaining: 4.57min
11 : 21 : 58
Water System
Set Softener Para.
Set Time of Day
Set Regen. Time
Set Water Hardness
Set Time of Day
11:20

Apec Water SOFTENER-HE-30-FG Specifications

General

Brand	Apec Water
Model	SOFTENER-HE-30-FG
Category	Water Dispenser
Language	English