SETTING THE FEEDERING
2. Attach food tank to the feeder body and lock it. Lock the lid securely.
Power on
Dual Power Modes
Connect the power cable and install the batteries as a backup in case of
power cuts.
The feeder can run on batteries alone.
Power off
Unplug the power cable and remove the batteries.
Setting the Current Time
Note: The feeder can work well only when the time of the feeder is consistent
with the current time.
1. After the feeder is powered on, press and hold the Setting Button for about
3 seconds, the hour digit flashes, press the Up/Down button to set the hour
and then press the Setting Button to confirm.
5
To Next Page
Loading...