● Use the product according to the installation operating instructions.
● Place the product on a stable surface to prevent from falling.
● Keep away from fire and sunlight all year out.
● To prevent liquid from dropping,keep the product away from other adapter an electrical
appliances and electrical plugs
● Do not scratch the surface or interior of the the product with sharp objects.
● Please use the product under normal pressure above 5℃.
● Do not use the dishwasher to wash the product and other part expect the water drinking tray.
4. Put the filter tank into the water tank.
5. Put the filter sponge upward into the filter groove.
6. Put the drinking tray in to the filter tank,install it
into the water outlet,and adjust it to a proper height.
7. Rotate and fasten the latch inward, place the
assembled water dispenser on a stable ground,
insert the power adapter into the female power
cord and rotate and fasten. Connect the power
supply, and the water dispenser starts to work.
Three water outlet mode can be switched by manually to adjust the height of the umbrella ,be
suitable for the cat according to its preference.
Slot 1 fountain
Slot 2 fountain+short streamline
Slot 3 fountain+long streamline
Install method:Align the bottom of the umbrella with the water outlet of the drinking tray and
insert it vertically.
1
2
3
water outlet of the drinking tray
Water outlet mode options
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
03
To Next Page
Loading...