OPERATING MANUAL
9
Touch and activate the Hands-Free option next to
each headset you wish to put into this mode.
Note: When activated, green check mark will
appear next to Hands Free.
Single Lane
Single Lane Drive-Thru Push to Talk Mode (PTT)
• A single beep is heard in the headset alerting the user a car is present at the speaker post.
• Press and hold either L1 or L2 switch to speak to the customer. The microphone boom tip will flash green.
• Speak into the microphone to communicate with the customer.
• After the customer leaves the speaker post, the headset will stop transmitting and the green light on the
microphone boom tip will stop flashing.
Single Lane Drive-Thru Hands-Free Mode (Talk Lock)
• A single beep is heard in the headset alerting the user a car is present at the speaker post.
• Press and release either L1 or L2 switch to speak to the customer. The microphone boom tip will flash green.
• Speak into the microphone to communicate with the customer.
• To mute the microphone during the order, press either L1 or L2 once. The light on the microphone tip will stop flashing.
• Press and release either L1 or L2 to speak with the customer again. The microphone boom tip will flash green.
• After the customer leaves the speaker post, the headset will stop transmitting and the green light on the
microphone boom tip will stop flashing.
To Next Page
Loading...