OPERATING MANUAL
3
If a battery is already in the headset, pick the headset up to
turn on. A blue light will appear underneath the RF logo
and green light on the microphone tip will appear.
Note: If the light on the microphone boom is blinking red,
this indicates the headset needs to be registered.
Power OFF: Headset will turn o automatically after
10 minutes of no movement.
Volume Up and Down
Volume Up: Press the “V” switch. Each time the switch is pressed, a
short beep is heard and gets louder with each press of the switch.
Volume Down: After pressing the “V” switch six times,
the headset will return to the lowest volume setting.
To Next Page
Loading...