OPERATING MANUAL
6
Pair headsets message, you can now register headset(s).
Register to Base Station
Press and hold the “L1” and “P” switches until the headset starts to beep and the
light on the microphone boom flashes green and yellow. Release “L1” and “P.”
A long beep will be heard in the headset and the green and yellow light will
stop flashing.
Note:
• Can register up to 32 headsets.
• Can register multiple headsets at the same time.
• If the system is Dual Lane, follow the instruction above
but press and hold “L2” and “P” switches.
• When headsets are registered, press
exit then press the HOME icon.
To Next Page
Loading...