Apex Digital LD4688T - Page 20

SOUND




SOUND
Sound Settings
Surround Mode
Analog Sound Stereo
Digital Sound English
Digital Audio Output
Equalizer Settings
MENU
ENTER
:Return
:Move :Go to Next Menu
AVL
PCM
SOUND SETTING
Sound Mode User
Bass
Treble
Balance
MENU
:Return
:Move
:Change Setting
1.Press ENTER when the Sound Settings item is high lighted. Then you will go to the sub-
menu as
following.
2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.
3.Press ◄/► to the desired level.
4.When you have changed the settings, you can exit from the menu by pressing MENU.
Sound Settings
Surround Mode
Surround Mode
Press Ʒbutton to select the item Surround Modethen press ENTER button to adjustIt can set
the picture to fit the screen automaticallyWhen the Auto Wide is selectedthe symbol will show as
following
EQUALIZER SETTINGS
Mode Off
100
0(N/A)
250 500 1K2K
4K
10K
:Return
:Move :Change Setting
MENU
Equalizer Settings
Equalizer Mode
Press ▼/▲ button to select the item Equalizer Mode then press ◄/► button to select the desired
mode. Available Equalizer Mode
:
Off, Rock, Pop, Jazz, User.
0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A)
AVL
Digital Audio Output
Press ▼/▲ button to select the item AVL, then press button to select ON or OFF. Auto
V
olume Level can set the volume automatically adjust corresponding to the input audio
.
Press ▼/▲ button to select the item Digital Audio Output, then press ◄/► button to select the
desired digital audio output. Available digital audio output: , Raw and Off .PCM
ENTER