34 English
11. Fault search
licence code for the VHS
-
-
step, you will need to uninstall and subsequently
No video signals are
Please check the cable link and whether the cor-
graphics card drivers of your computer are up to
date.
No audio signals are
Please check the cable link. Then check whether
the correct input signal has been chosen in the
The quality of the video
The quality of the recorded videos primarily
depends on the source material used. The cable
important role. Please use high-quality cables in
order to avoid aloss of quality. If your device has
a S-Video output, this should be connected to the
S-video input of the Video Grabber. The S-Video
signal quality is higher by contrast with composite
The pictures are shown
in black and white.
that the signal cables are properly connected and
If no preview image is displayed, right-click on the program link. Go to the com-
from the drop-down menu.
To Next Page
Loading...