Apogee MiC - Using MiC with an iPad

Using MiC with an iPad
0 Plug MiC into your iPad using the provided iOS Dock Connector Cable.
f.) Check the status light on MiC, it should be Blue .
e Start up GarageBand and choose New Song.
MiC's status
light should turn to Green.
0 Choose Audio Recorder.
E) To hear your track, turn Monitor ON by clicking this icon
and following instructions.
0 Plug your headphones into iPad's headphone output
or just listen through iPad's built-in speakers.
G Click the Record button and you are recording with MiC!
MiC QuickStart Guide II