iBook G4
Foot and Foot Socket
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Warning: During this procedure, keep small parts away from children.
Tools Required
• Foot kit
• Soft cloth
• Pin
• Tweezers or needlenose pliers
• #0 Phillips jeweler’s screwdriver
Caution:
To avoid scratching the case, use caution when using tools to remove and
replace the foot and foot socket.
Procedure
Warning: Always shut down your computer before opening it to avoid damaging its
internal components or causing injury. After you shut down the computer, the
internal components can be very hot. Let the computer cool down before
continuing.
1. Place your computer on a clean, flat surface or soft cloth.
2. Shut down your computer and wait thirty minutes before continuing.
3. Disconnect the power cord and any other cables connected to the computer.
4. Close the computer, turn it over, and locate the foot that needs replacement.
To Next Page
Need help?
General
