Use these commands (with Quick Nav turned off) to work with text. VoiceOver
reads the text as you move the insertion point.
Go forward or back one character: Right Arrow or Left Arrow
Go forward or back one word: Option–Right Arrow or Option–Left Arrow
Go up or down one line: Up Arrow or Down Arrow
Go to the beginning or end of the line: Command–Left Arrow or Command–
Down Arrow
Go to the beginning or end of the paragraph: Option–Up Arrow or Option–
Down Arrow
Go to the previous or next paragraph: Option–Up Arrow or Option–Down
Arrow
Go to the top or bottom of the text field: Command–Up Arrow or Command–
Down Arrow
Select text as you move: Shift + any of the insertion point movement
commands above
Select all text: Command–A
Copy, cut, or paste the selected text: Command–C, Command–X, or
Command–V
Undo or redo last change: Command–Z or Shift–Command–Z
Support for braille displays
You can use a Bluetooth braille display to read VoiceOver output, and you can
use a braille display with input keys and other controls to control iPad when
VoiceOver is turned on. For a list of supported braille displays, go to
www.apple.com/accessibility/ios/braille-display.html.
Connect a braille display.
Turn on the display, then go to Settings > Bluetooth and turn on Bluetooth. Then
go to Settings > General > Accessibility > VoiceOver > Braille and choose the
display.
Adjust Braille settings.
Go to Settings > General > Accessibility > VoiceOver > Braille, where you can:
Choose contracted, uncontracted 8-dot, or uncontracted 6-dot braille input
or output
Turn on the status cell and choose its location
Turn on Nemeth code for equations
Display the onscreen keyboard
Choose to have the page turned automatically when panning
Change the braille translation from Unified English
Change the alert display duration
For information about common braille commands for VoiceOver navigation, and
for information specific to certain displays, go to support.apple.com/HT4400.
Set the language for VoiceOver.
To Next Page
Loading...
