Switch Control > Loops.
Perform screen gestures.
Choose Gestures from the control menu.
Scroll the screen.
Select an item in a scrollable part of the screen, then:
With Auto Tap off: Choose the Scroll Down button (next to the Tap button) in
the control menu. Or, for more scrolling options, choose More, then choose
Scroll.
With Auto Tap on: Choose Scroll from the control menu. If many actions are
available, you might have to choose More first.
Tap the Home button.
Choose Home in the control menu.
Perform other hardware actions.
Select any item, then choose Device from the menu that appears. Use the menu
to mimic these actions:
Double-click the Home button for multitasking
Open Notification Center or Control Center
Press the Sleep/Wake button to lock iPad
Rotate iPad
Flip the Side Switch to mute iPad volume
Press the volume buttons
Show the Search screen
Hold down the Home button to open Siri
Triple-click the Home button
Shake iPad
Press the Home and Sleep/Wake buttons simultaneously to take a screenshot
Swipe down from the top with two fingers to speak the screen (if you have
Speak Screen turned on)
Item scanning
Item scanning alternately highlights each item or group of items on the entire
screen until you trigger your Select Item switch. If there are many items, Switch
Control highlights them in groups. When you select a group, highlighting
continues with the items in the group. When you select a unique item, scanning
stops and the control menu appears. Item scanning is the default when you first
turn on Switch Control.
You can choose from three scanning styles—auto scanning, manual scanning,
and single-switch step scanning. Auto scanning automatically highlights items,
one after the other. With manual scanning, you use one switch to highlight an
item and another to activate it. Single-switch step scanning uses a switch to
move the highlight from item to item. If you take no action after a period of time,
the highlighted item activates.
Select an item or enter a group.
To Next Page
Loading...
