sequential taps at four locations on the screen creates a simultaneous four-
finger tap.
Exit a menu without performing a gesture.
Tap anywhere outside the menu. To return to the previous menu, tap the arrow in
the middle of the menu.
Move the menu button.
Drag it anywhere along the edge of the screen.
Adjust your accessory tracking speed.
Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Hide the menu button (with accessory attached).
Go to Settings > General > Accessibility > AssistiveTouch > Always Show Menu.
Touch Accommodations
If you have trouble using the touchscreen, use Touch Accommodations to
change how the screen responds to touches.
Choose how long you must touch the screen before a touch is recognized.
Go to Settings > General > Accessibility > Touch Accommodations, turn on Hold
Duration, then choose a duration (the default is 0.10 seconds).
Choose the duration in which multiple touches are treated as a single
touch.
Go to Settings > General > Accessibility > Touch Accommodations, turn on
Ignore Repeat, then adjust the timing.
Choose the location where iPad registers a tap.
Go to Settings > General > Accessibility > Touch Accommodations, then choose
a Tap Assistance option (Use Initial Touch Location or Use Final Touch Location).
When you choose Use Initial Touch Location, iPad uses the location of your first
tap—when you tap an app on the Home screen, for example. Choose Use Final
Touch Location, and iPad registers the tap where you lift your finger.
Software and hardware keyboards
If you have difficulty distinguishing characters on the iPad keyboard or
manipulating a hardware keyboard, find help by going to Settings > General >
Accessibility > Keyboard. You can adjust settings to:
Show only uppercase keys on the iPad keyboard.
Adjust the key repeat rate on hardware keyboards.
Use the Sticky Keys feature to hold down modifier keys, such as Command
and Option, as you press another key.
Adjust the time between when a key is pressed and when it’s activated.