Select text as you move: Shift + any of the insertion point movement commands above
Select all text: Command–A
Copy, cut, or paste the selected text: Command–C, Command–X, or Command–V
Undo or redo last change: Command–Z or Shift–Command–Z
Support for braille displays
You can use a Bluetooth braille display to read VoiceOver output, and you can use a braille
display with input keys and other controls to control iPhone when VoiceOver is turned on.
For a list of supported braille displays, see
.
Connect a braille display. Turn on the display, then go to Settings > Bluetooth and turn on
Bluetooth. Then, go to Settings > General > Accessibility > VoiceOver > Braille and choose
the display.
Adjust Braille settings. Go to Settings > General > Accessibility > VoiceOver > Braille,
where you can:
Choose contracted, uncontracted 8-dot, or uncontracted 6-dot braille input or output
Turn on the status cell and choose its location
Turn on Nemeth code for equations
Display the onscreen keyboard
Choose to have the page turned automatically when panning
Change the braille translation from Unified English
Change the alert display duration
For information about common braille commands for VoiceOver navigation, and for
information specific to certain displays, see .
Set the language for VoiceOver. Go to Settings > General > Language & Region.
If you change the language for iPhone, you may need to reset the language for VoiceOver
and your braille display.
You can set the leftmost or rightmost cell of your braille display to provide system status
and other information. For example:
www.apple.com/accessibility/ios/braille-
display.html
support.apple.com/HT4400
To Next Page
Loading...
