16 Chapter 3
Using Your iPod Hi-Fi
To switch playback from an iPod to a device connected to the audio input port:
If an iPod with a dock connector and an audio device are connected to your iPod Hi-Fi
at the same time, your iPod Hi-Fi plays music from the iPod by default.
m
Press and hold the Menu button on the remote. The status light blinks green, and the
iPod pauses. To switch back to the iPod, press and hold the Menu button again.
You can also remove your iPod to switch to a device connected to the audio input port.
To play audio from your computer using your iPod Hi-Fi:
m
You can connect an AirPort Express Base Station to your iPod Hi-Fi and stream audio
wirelessly from a computer in another room.
For more information, go to www.apple.com/airportexpress.
m
In most cases, you can also connect a computer directly to your iPod Hi-Fi using an
audio cable. If you have a Power Mac G5 or other computer with optical digital audio,
you can connect it using a optical digital cable for better quality sound.
Adjusting the Sound
To adjust the volume:
m
Press the Volume Up (
∂
) or Volume Down (
D
) button on top of your iPod Hi-Fi or on
the included remote.
With some newer models of iPod, you can also adjust the volume using the iPod Click
Wheel.
To Next Page
Loading...