Avoiding water and wet locations Do not use iPod nano in rain, or near washbasins
or other wet locations. Take care not to spill any food or liquid on iPod nano. In case
iPod nano gets wet, unplug all cables, press the Sleep/Wake button to turn the
iPod nano screen o before cleaning, and allow it to dry thoroughly before turning the
screen on again or connecting it to a computer. Do not attempt to dry iPod nano with
an external heat source such as a microwave oven or hair dryer. Damage to iPod nano
caused by contact with liquid is not covered under the warranty.
Replacing the battery and repairing or modifying iPod nano Never attempt to repair
iPod nano yourself. iPod nano does not contain any user-serviceable parts. If iPod nano
has been submerged in water, punctured, or subjected to a severe fall, do not use it
until you take it to an Apple Authorized Service Provider. Disassembling iPod nano may
cause damage that is not covered under the warranty. For service information, choose
iPod Help from the Help menu in iTunes or go to www.apple.com/support/ipod. The
rechargeable battery in iPod nano should be serviced only by an Apple Authorized
Service Provider. For more information about batteries, go to www.apple.com/batteries.
Charging iPod nano To charge iPod nano, only use the included Apple Dock
Connector to USB Cable with an Apple USB Power Adapter, or a high-power USB port
on another device that is compliant with the USB 2.0 standard; another Apple branded
product or accessory designed to work with iPod; or a third-party accessory certied to
use the Apple “Made for iPod” logo.
When you use the Apple USB Power Adapter (sold separately at www.apple.com/
ipodstore) to charge iPod nano, make sure that the power adapter is fully assembled
before you plug it into a power outlet. Then insert the Apple USB Power Adapter rmly
into the power outlet. Do not connect or disconnect the Apple USB Power Adapter
with wet hands. Do not use any power adapter other than an Apple iPod power
adapter to charge your iPod.
The Apple USB Power Adapter may become warm during normal use. Always allow
adequate ventilation around the Apple USB Power Adapter and use care when handling.
Unplug the Apple USB Power Adapter if any of the following conditions exist:
The power cord or plug has become frayed or damaged.
•
The adapter is exposed to rain, liquids, or excessive moisture.
•
The adapter case has become damaged.
•
You suspect the adapter needs service or repair.
•
You want to clean the adapter.
•
Accessories and third-party chargers Read all safety instructions for any products and
accessories before using with iPod nano. Apple is not responsible for the operation of
third party accessories or their compliance with safety and regulatory standards.
71
Chapter 12
Safety and Cleaning
To Next Page
Loading...
