Apple Magic Trackpad 2 - Remove Trackpad Pairing; Using Your Magic Trackpad 2

2 English
Your trackpad will pair automatically with
your Mac.
After the trackpad is paired, you can disconnect
the cable and use your trackpad wirelessly.
Remove a pairing
After you pair your Magic Trackpad 2 with a
Mac, you can pair it again with a dierent Mac.
To do this, remove the existing pairing and
then pair the trackpad again using the setup
instructions in the previous section.
To remove a pairing:
1 Choose Apple menu > System Preferences,
then click Bluetooth.
2 Select the trackpad, then click the Delete
button next to the trackpad name.
Use your Magic Trackpad 2
Your Magic Trackpad 2 has a Force Touch
surface for moving the pointer and performing
gestures. To set up gestures and set other
options, choose Apple menu > System
Preferences, then click Trackpad.
Position your Magic Trackpad 2 on a rm
level surface. When you move the pointer
or perform gestures, you can rest your hand
comfortably on the Magic Trackpad 2 and slide
your ngers lightly on the surface.
Apple Confidential