PowerBook (FireWire)
Memory (Upper RAM Slot)
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow
these instructions could result in damage to your equipment and may void
your warranty.
Replacing memory in your computer requires seven basic steps:
• Turn off the computer.
• Open the computer.
• Remove the heat shield.
• Remove the RAM you are replacing.
• Install the replacement RAM.
• Replace the heat shield.
• Close the computer.
Note:
A video version of the installation instructions is available at
http://www.info.apple.com/installparts
Tools Required
• Jeweler’s flat-blade screwdriver
• Phillips screwdriver
Electrostatic Discharge (ESD)
Static electricity, a normal and natural phenomenon, builds up on your body
as you walk around. You experience an electrostatic discharge (ESD) when
you touch an object and feel a spark. ESD can cause damage to the
internal components of your computer.
To avoid ESD damage, read and follow all instructions. If a grounding wrist
strap is included with your replacement memory, refer to the instructions
included for how to ground and use the strap.
To Next Page
Need help?
General
