22 Chapter 3
Setting Up Your Time Capsule
Using AirPort Utility
To set up and configure your Time Capsule, use the setup assistant in AirPort Utility.
AirPort Utility is installed on your computer when you install the software from the
Time Capsule CD.
On a Macintosh computer using Mac OS X v10.4 or later:
1
Open AirPort Utility, located in /Applications/Utilities/.
2
Select your Time Capsule and click Continue.
3
Follow the onscreen instructions to set up your Time Capsule and your wireless
network.
On a computer using Windows XP (with Service Pack 2) or Windows Vista:
1
Open AirPort Utility, located in Start > All Programs > AirPort.
2
Select your Time Capsule and click Continue.
To Next Page
Loading...