Apple TV User Guide
If you're adding an external switch, you need to connect it to Apple TV before it will
appear in the list of available switches. Follow the instructions that came with the
switch. If it connects using Bluetooth, you need to pair it with Apple TV. For more
information, see Connect Bluetooth devices to Apple TV.
Turn on Switch Control. In Settings R, go to General > Accessibility, then turn
on Switch Control.
Turn off Switch Control. In Settings R, go to General > Accessibility, then turn
off Switch Control.
Basic techniques
Here are some basic techniques for Switch Control.
Select an item. While the item is highlighted, trigger the switch you've set up as
your Select Item switcl1. If you're using a single switch, it's your Select Item switch
by default.
Perform an action on the selected item. Choose a command from the control
menu that appears when you select the item. The layout of the menu depends on
how you configure press behavior. In Settings
R, go to General > Accessibility >
Switch Control > Press Behavior and choose an option.
• Wit/1 Default on: The control menu usually includes only the Press button and
the More button (two dots at the bottom). If you're in a scrollable area of the
screen, a Scroll bar also appears. To press the highlighted item, trigger your
Select Item button when Press is highlighted. To see additional action buttons,
choose More at the bottom of the menu. If you have multiple switches, you can
set one up specifically for pressing.
• With Auto Press on: To press the item, do nothing-the item is automatically
tapped when the Auto Press interval expires (0.75 seconds if you haven't
changed it). To see the control menu, trigger your Select Item button before
the Auto Press interval expires. The control menu skips the Press button and
goes right to the full set of action buttons.
96
To Next Page
Loading...
